Packaging Details
- Unit Type: piece
- Package Weight: 0.2kg (0.44lb.)
- Package Size: 18cm x 10cm x 2cm (7.09in x 3.94in x 0.79in)
Brake Fluid Liquid Tester Car Brake Liquid Digital Tester For DOT3/DOT4 Automotive Testing 5 LED Car Diagnostic Indicator Pen
Tester Specification:
1. To check the quality of brake fluid quality
2. 5 LEDs to indicate percentage of water in the brake fluid
3. Automatically power off
4. Operated by a LR03 AAA 1.5V battery.(NOT INCLUDE)
Indicator Instruction:
1. 5 LEDs indicating the water % in the brake fluid:
2. 0% light indicates that the battery is OK, no replacement
3. 1% light indicates that moisture content of brake oil less than 1% , brake fluid has a good performance, and ease of use.
4. 2% light indicates that moisture content of brake oil less than 2%, brake fluid can be continued to use
5. 3% light indicates that moisture content of brake oil less than 3% , proposed to replace brake fluid.
6. 4% light indicates that moisture content of brake oil less than 4%, brake fluid should be replaced immediately.
7. Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thanks for your understanding.
Green: Battery OK, that is, brake fluid does not contain water
Green / yellow: brake oil in water content of less than 1%, better brake fluid performance, ease of use.
Green / yellow / yellow: brake oil in water content of about 2%, brake fluid can continue to use.
Green / yellow / yellow / red: brake oil in water content of about 3%, the proposed replacement of brake fluid.
Green / yellow / yellow / red / red: brake oil in water content of at least 4%, the brake fluid must be replaced immediately responsible for very dangerous.
Operation Guideline:
1. Unscrew the brake fluid reservoir,and pull off the cap of the Brake fluid tester.Dip the test probes into the brake fluid up to the plastic rim of the device.
2. Press the button for power on,green LED will light up.Insert the tester into reservoir for one second then the tester result will be correctly indicated by LEDs.Repress the button for power off.The tester will automatically power off after about 15 seconds of inactivity.
1X brake fluid tester
-->