Fit for Silverado Sierra SS 6.0
The emblem fits both front door locations and tailgate location
Make your car more stunning and luxury
Comes with 3M Self Adhesive backing. Ready to stick on any flat, clean and dry surface
Method of use:
1. Surface Cleaning: paste must be kept absolutely clean and dry surface, general cleaning can be used without fall off fiber cloth dips in alcohol to scrub,
the solvent to clean the surface must be thoroughly play rear can paste stay solvent.
2. Products Paste: paste before install the product on the required parts to adjust, determine the position of the product installation,then tore off the membrane to paste.
Operation should avoid finger contact with the rubber surface, after paste products must be firm pressure for at least one minute, to ensure that the glue is the full contact and wetting.
If the weather is cooler,best before the paste to moderate heat, double-sided adhesive (with a hair dryer or lighter), in order to achieve the effect.
3. Waterproof and Dustproof: products and parts paste should be within 24 hours after not contact with water and large dust.
three day inside don\`t wash the car or caught in heavy rain, can achieve the best cohesive force.
Specifications:
Material: ABS
Color: Red+Black Letter
Size: 29x3cm/11.42x1.18"(LxW)
Quantity: 1 Pc
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!