Comparison between before and after installation
Push-button start
![](https://ae01.alicdn.com/kf/S86ec8f62da73492f8497437411196810E.png)
For convenience The key leaves the car 3-4 meters automatically locked
![](https://ae01.alicdn.com/kf/S4aabb8d4b6584696bc34a7492e785141Q.jpg)
Comfortable entry: The car key will automatically unlock when it is close to the car 1-2 meters
![](https://ae01.alicdn.com/kf/S1ad258cd93e74ffebca53697f62e5e6fU.jpg)
Remote start:
After locking the car, press and hold the lock button for 2-3 seconds to start the car
![](https://ae01.alicdn.com/kf/Sef434dcf620847a18278e2484c40a0ccX.png)
Cooling/preheating:
Do not turn off the car air conditioning or heating, remote start the car will open itself
![](https://ae01.alicdn.com/kf/Se330f097c1974705a6228f3a82cec3f50.png)
Automatic window closing:
Turn off the car to lock the four doors and windows will automatically close(This function is available for some cars)
![](https://ae01.alicdn.com/kf/Sf8d54d1621ee4b45a548dbf79fe12b1aO.png)
Product List
![](https://ae01.alicdn.com/kf/Sbfede41208cc439d9cdc1ee78cbbdc9d0.jpg)
¨çHigh Frequency Antenna ¨èLow Frequency Antenna ¨éExtension cord plug ¨êCAN plug ¨ë12V power cord ¨ìStart Line ¨íStart button
![](https://ae01.alicdn.com/kf/S0d732b2f97164b1d857638c1b8653dc3G.jpg)
Installation Tutorial
This installation diagram is for reference only, different car installation methods are slightly different (Consult customer service for details)
Start-up board handling precautions
1£¬Heat-shrinkable tube and light-emitting circle tomaintain a flat, otherwise not put in the bottom
2£¬Keep the torch temperature at 350° when soldering wires
3£¬Pay attention to the direction of the wire when soldering
4£¬The direction of the emergence of the line in the rubbershell opened a mouth, the wire harness and rubber shel! tiedtogether to prevent the wire harness under pressure off
The place marked with a red square needs to be coveredwith heat shrink tubing, which is matched inside theproduct. and heated with a hot air blower when covered
![](https://ae01.alicdn.com/kf/S4dda5247495a4ec68072474b32817125A.jpg)
When welding ines to carefully check the condition of the car.do not use brute force when dismantling the circuit board, weldingines to pay attention to the line number, all lines have thecorresponding number on top, contacts do not weld the wrong,carefully checked before welding lines. Do not drop excess tin onthe board when welding, and use a brush to clean up after weldingto avoid having solder in it
No.1: Blue No.2: 0range No.3: Black No.4: Yellow No.5: White
![](https://ae01.alicdn.com/kf/S756d1827564e4b3bac780b7e33706ceeV.jpg)
The original car key inserted into theoriginal start without twisting, tied with tape
![](https://ae01.alicdn.com/kf/Sb1987a85bb574c84a780e9c6118862ede.jpg)
The red power cable is connected to the red with yellow leather power cable of the car OBD plug.
![](https://ae01.alicdn.com/kf/S3629f0fdbdb4428386802d4522b1fda2x.jpg)