Motorcycle Seat Cover Cushion Set Package Non-Slip Gripper Soft For KXF CRF YZF WR TC FC SX SXF EXC 125 250 300 350 450 500
New product
Material: (A STYLE )leather particles 3D : £¨£Â STYLE£©£ºfrosted.
Features: non-slip, waterproof, sun-proof, anti-wear
Color:orange, red ,blue, green ,black
Weight: 0.3KG
Please note: Please be optimistic about the size before buying to ensure that it is fully compatible with your model.
This product is a universal product
Please note that the product without manual there might be 1-2 mm error please watch the size after purchase to make sure it fit your car
Easy to install, high effiency. Seat cover installation instructions:
1. Install the motorcycle polo tool is a nail gun, one quarter inch nail, screwdriver, pliers, scissors.
2. Remove the seat bottom seat from the motorcycle.
3. Put the new seat cushion sets of seat, make sure the seat cushion set in the center of the base, with a nail gun on the base with good stitching needle fixed on both ends.
4. Then it with stitching needle fixed on both sides of the center.
5 slowly down the side of the seating of the stretch to flattening fold, then immediately with stitching needle fixed.
6, be careful to seating head stretch until smooth smooth, then use stitching needle fixed.
7, be careful to seating tail stretching until smooth smooth, then use stitching needle fixed.
8. If you find a seat covers the middle fold, please remove some stitching needle, then tweak fold and fixed it up.
9. Carefully remove extra seating material with scissors. It is about 1 cm far from stitching needle.
10. Installed new seating base put back in the motorcycle later on.
Package contains:
Does not include installation instructions, only contains one product
notes
If you are unable to determine the accessories, please check by yourself or provide the motorcycle model for inspection. If you do not provide a check on the model of the motorcycle, we think that you are 100% aware of the accessory. We will not pay for unsuitable returns. Please measure the installation size before buying to get the most suitable product. Due to manual measurement, please allow a difference of 0.5-1 inch (1 inch = 2.54cm). Please carefully check the appearance, size and shape of the product before ordering, and then compare it with your original product, thank you.
Note : Please Check the size before order!! thank you
Dear friend, please check the size and purchase thanks