Packaging Details
- Unit Type: piece
- Package Weight: 0.320kg (0.71lb.)
- Package Size: 12cm x 11cm x 26cm (4.72in x 4.33in x 10.24in)
Foam Nozzle for Patriot (Old) High Pressure Washers
Suitable Models: GT125, GT130, GT140, GT150, GT160
If you are looking for the foam nozzle for Patriot New Models (GT320, GT340, GT360, GT540), Please visit the product link below:
Disclaimer: We are not Patriot BRAND or affiliated with them. We did not sell these Pressure Washers, but do offer some compatible parts for them.
Parcel contents:
1. Nylon body foam nozzle
2. 0.6 Litre bottle, marked with volume calibration line
3. Suction tube
4. Chosen adapter
Specification:
1. Pressure range: 100 bar ~ 160 bar (1400psi ~ 2320 psi), both home-use and professional pressure washers work perfectly;
2. Foaming performance: Plentiful, thick and high-dense foam, light duty and durable design; Extremely low consumption of liquid - 1.5 minutes/ 100ml
3. Material: nylon body and adapter, brass nozzle, and HDPE bottle.
4. Capacity of bottle: 0.6 L
5. Adjustable consumption of snow foam cleaner, Variable angle spraying pattern from pencil to 60° fan, resistant to chemicals.
On-Time Delivery:
1. Guaranteed the product will be shipped out within 5 days. Usually it will be sent out the next day after your payment.
2. Guaranteed the product will be delivered within 60 days. Usually it will be delivered in 2 ~ 4 weeks. (For Brazil, the guaranteed time is 90 days, and the estimated delivery time 5~8 weeks).
Quality Warranty:
1. 100% guaranteed to make thick and dense foam for all pressure washers.
2. 3-year warranty guaranteed (except the mesh filter inside).
3. 100% after-sales service guaranteed forever.
All of our products have been 100% inspected and tested before shipping. Please rest assured to buy. We provide most competitive price and high quality of products to our customers.
Buyer Protection:
1. Full refund if you don\'t receive your order
2. Full or partial refund , if the item is not as described
GIFT:
Car washing shampoo as gift is available upon request. If you need the gift, please write a message "Shampoo" or "Gift" when you make the order of the foam nozzle.
Important Notice:
1. As there are two types of adapter for this brand of pressure washer. Please check adapter size and make sure it fits your machine . We don\'t take any responsibility for the incompatibility of adapter. If you are not clear, please contact us, and send us the photo of your gun and lance, we will help to choose the suitable adapter.
2. For fast shipping and customs tax, the declared value for each product will not be more than US5.
Setting up your foam nozzle:
1. Attach the suction tube to the inlet port of foam nozzle.
2. Fill up the plastic bottle with plain water and run it through your pressure washer. Check for leaks and check the lance is working correctly.
3. Once you are satisfied there are no leaks and the lance is functioning correctly, fill up an inch of your dedicated snow foam cleaner in the bottle and appropriate amount of water.
4. After every use you must follow through with plain water for 30 seconds to flush out any snow foam cleaner. If left in, the mesh filter can become scaled and blocked.
Using Tips:
1. Higher pressure from pressure washer, better foam from foam nozzle. To get the thick foam as the photo above, the pressure of pressure washer should be more than 130bar.
2. High foam of snow foam cleaner is important. The general car washing shampoo may not generate thick foam.
3. For better foam, 20% snow foam cleaner + 80% warm water is suggested. You can reduce the water amount accordingly, if aren’t satisfied with the foam quality.
4. To prolong the life of foam nozzle, after every use you must follow through with clean water for 30 seconds to flush out any snow foam cleaner. If left in, the mesh filter can become scaled and blocked.
Troubleshooting:
If the foam nozzle can’t work properly, please try to check following points:
1. If the pressure washer is functioning correctly. There is no water leaks and air leaks anywhere.
2. If the pressure and flow from tap water is insufficient. The foam nozzle can’t create foam at low pressure and water flow. Also, the self-priming function can’t be applied when you are using foam nozzle (i.e. The inlet water can’t come from pool or bucket).
3. If somewhere of foam nozzle is blocked by debris, dried detergent, or sealing tape. Please check the brass nozzle, detergent suction nozzle and mesh filter. (Please contact us if you don’t know how to disassemble the foam nozzle and clean mesh filter)