|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- Ä«¸Þ¶ó ÀåÂø: ¾Æ´Ï´Ù
- Á¶¸³ »óÅÂ: ÈÞ´ë¿ë
- ¸ðµ¨ ¹øÈ£: MS22082501
- ȣȯ¼º: Àüü ȣȯ °¡´É
- ºê·£µå À̸§: mumubiz
- ±Ù¿ø: CN (Á¤Ç°)
- Input voltage: AC 85V-250V /USB 5V
- Max.Current: 2000W/10A/gang
- Max.load: 3500W
- Wireless:Wi-Fi: 2,4ghz b/g/n+Bluetooth
- Frequency radio: 433Mhz
- Size: 81*76*28mm
- APP: Smart life / Tuya Smart
- System: IOS / Android
- Working mode: Self lock / inter lock / Inching
- Channel: 4 channels
¿É¼ÇÁ¤º¸[(201335940)Switch only][(201335941)Switch and RF remote]
Parameters:
Input voltage: AC 85V-250V /USB 5V Max.Current: 2000W/10A/gang Max.load:3500W/164/40ang Wireless:Wi-Fi 2,4ghz b/g/n+Bluetooth Frequency radio:433Mhz Working temperature: - 20°C-70°C Size: 81*76*28mm
Checklist before using the device
Your smart phone or tablet has connected to a 2.4g WiFi with internet. You need to enable Bluetooth of the phone You have the correct Wii PWD. You smart phone or tablet must have access to APP store Google play Your router is MAC-open
User Guide
You can download the App by searching "Tuya Smart" in mobile app stores or scanning the QR code on the manual. Register an Tuya Smart account. If you have Tuya Smart account. just login.
Add devices
Reset the device first: if the network indicator(red light) blinking fast ,skip the reset step. if not , Power on , hold down the Reset button for 5 seconds. until indicator blinking fast . Clicking + in the top right corner on tuya smart app. then click "Auto Scan", wait a few seconds, After the devices are found,Click "Next"
Select 2.4GHz Wi-Fi network and enter your password. Name your device
when the network is disconnected , the switch will automatically switch to the bluetooth control of the phone Click the on/off buttons on the APP can control device , Manual control swyitch also can be display real-time on the APP
Remote control matches the code
Matching ,click setting , RF remote control setup , Add. When the prompt interface pops up then long press the remote control button you want to match loosen the remote control buttons, matching success Added successfully, assign the remote control buttons to the switches that need to be controlled match other buttons, repeat steps
|
|
|
|
|