|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- Áõ¸í¼: NONE
- ºê·£µå À̸§: CONVOY MK
- ±Ù¿ø: CN (Á¤Ç°)
- Ç°¸ñ À¯Çü: ¼ÕÀüµî
Parameter: - LED : 1 * luminus SST40 / osram KW CSLPM1.TG
- FLUX: max 2000lm
- Mode:4 modes 0.1%-3%-30%-100% / 12groups
- Mode memory: yes
- Battery: 1 *?21700 /?18650? (not included)
- Material: aluminum alloy
- Color : Black
- Switch type: reverse
- Lens : Convex lens (high borosilicate glass)
- Diameter: head 52mm /tail 28.2mm
- Length: 135.8mm(zoom in)/149.5mm(zoom out)
Driver instructions:(4modes) Now we offer another driver version, which has a simple 4 modes for switching, which is very suitable for ordinary users. modes : 0.1%-3%-30%-100%? max current output is 6000mA Its biggest advantage is that no frequency can be seen in any mode, and there is temperature management. It can control the flashlight temperature not to exceed 55 degrees Celsius, If the flashlight temperature is below 55 degrees Celsius, it will output full current. If it is above 55 degrees Celsius, it will constantly adjust the current so that the flashlight will not overheat. Driver (sst40 12groups): max current output is 6000mA Its biggest advantage is that no frequency can be seen in any mode, and there is temperature management. It can control the flashlight temperature not to exceed 55 degrees Celsius, If the flashlight temperature is below 55 degrees Celsius, it will output full current. If it is above 55 degrees Celsius, it will constantly adjust the current so that the flashlight will not overheat. 12 groups: 1.click the switch to turn the flashlight on/off,tap the switch to select mode 2.if flashlight is turnedon,tap the switch 20 times quicklyto enter into config mode.(On a visual interface,as long as you click on an option, it means that the option is selected. The flashlight has no visual interface. It flashes to represent an option, and "tap the switch in the flashing process" means to select the option.) Option 1(normal-flash 1 time?+ buzz-flash):tap the switch to enter into sub-option to select the mode group,If the user has no operation, the config mode will enter option 2. -------------sub-option 1.1 (normal-flash?1 time) : tap the switch to select mode group 1 (0.1%, 1%, 10%, 35%, 100%, strobe, biking, battery-check) -------------sub-option 1.2 (normal-flash?2 times) : tap the switch to select mode group?2 (0.1%, 1%, 10%, 35%, 100%) -------------sub-option 1.3 (normal-flash?3 times) : tap the switch to select mode group?3 (100%, 35%, 10%, 1%, 0.1%) -------------sub-option 1.4 (normal-flash?4 times) : tap the switch to select mode group?4 (1%, 20%, 100%, strobe, biking, battery-check, SOS) -------------sub-option 1.5 (normal-flash?5 times) : tap the switch to select mode group?5 (1%, 20%, 100%) -------------sub-option 1.6 (normal-flash?6 times) : tap the switch to select mode group?6 (100%, 20%, 1%) -------------sub-option 1.7 (normal-flash?7 times) : tap the switch to select mode group?7 (0.1%, 1%, 10%, 50%, strobe, biking, battery-check, SOS) -------------sub-option 1.8 (normal-flash?8 times) : tap the switch to select mode group 8(0.1%, 1%, 10%, 50%) -------------sub-option 1.9 (normal-flash?9 times) : tap the switch to select mode group?9 (50%, 10%, 1%, 0.1%) -------------sub-option 1.10 (normal-flash?10 times) : tap the switch to select mode group?10 (1%, 10%, 35%, 100%) -------------sub-option 1.11 (normal-flash?11 times) : tap the switch to select mode group?11 (100%, 20%, strobe) -------------sub-option 1.12 (normal-flash?12 times) : tap the switch to select mode group 12(100% only) Option?2(normal-flash 2 times?+ buzz-flash):tap the switch to active the mode memory or inactive it,If the user has no operation,flashlight will enter?into the last mode.
|
|
|
|
|