Product diy that provides perfect vector network measurement capabilities, tiny and portable, stand-alone with 4 inch lcd display, portable with 1950mah battery or usb powered
The enhanced frequency algorithm can use the strange harmonic extension of si5351 to support the measuring frequency up to 1.5ghz. The si5351 direct output 50k-300mhz frequency range provides better than 70db dynamic, the 300m-900mhz extended band offers better than 60db dynamic, and the 900m-1.5Ghz band is better than 40db dynamic
The main function of standard firmware is used for measuring antenna performance. The tx/rx method can measure the full s11 and s21 parameters. If you need to get kafe s22, you need to manually replace the transceiver port wiring
Using nanovnasaver pc software, it can connect to a nanovna and extract the data for display on a computer and to save touchstone files. We can export touchstone (snp) files to various radio projects and simulation software through pc software
The metal shell is designed to reduce external interference and improve measurement accuracy
Display: 2.8 inch tft (320x240)
RF output: 0dbm (/-2dbm)
Door Swr: less than 1.1
Size: 54mm x 85.5mm x 11mm
Weight: 63 grams
Pcb: 50mm x 68mm x 10mm (without connector, lever switch)
Measuring frequency: 10khz ~ 1.5Ghz
Measuring range: 70db (50khz-300 mhz), 60db (300 m-900mhz, 40db (900m-1.5Ghz)
USB interface: tyoe-c usb communication mode: cdc (serial)
Power: 5v 120ma usb, can use battery powered, maximum charging current 300ma (battery included)
Number of scanning points: 101 (fixed)
Screen Tracking: 4, Marking: 4, Setting Save: 5
Colour: black
Material: plastic metal
Package contents:
1 * mainframe osmo
1 * USB data cable type c
1 * USB data cable
2 * sma male to rf cable rg174 male
1 * set of sma calibration parts
1 * sma female to female connector
Only the contents of the package above, other products are not included.
Note: Light photography and different displays can cause the color of the item in the image slightly different from the real thing. The allowed measurement error is/- 1-3cm.