Characteristics:
No-Spill Coolant Funnel: The innovative bleeding kit regulates the coolant input system and makes unattended Filling. Eliminates trapped air bags that can cause instability in the cooling system and heating.
Filling Firm Without Leaks: Highly sealed interface, clear funnel design, makes a quick visual check of the coolant. Take the mess and save your time.
Robust Material and Craftsmanship: Made of PP ECO material. Test withstand 200 degrees high temperature,accidental falls (Unless meeting a severe external force).
Suitable for Most Vehicles: Multiple adapters, 2x45° elbows, a 5"extender, fit Radiators or Surge Tanks on Most Domestic and Import Cars and Light Trucks.
Economic Design: Liquid Stop will help you economically recycle unused coolant in the hopper after finishing. Bright color and sealed lid help you to store efficiently.
Instructions:
1. install the right size adapter and Tight to make sure it does not leak. Place the gasket in a downward position.
2.YOUR CAR MUST OFF, DO NOT START THE CAR YET!
Fill the coolant funnel about 1/3 up while COLD, so when system burps liquid falls into the system instead of more air.
3. to your car and set the climate control settings (or heat setting) to the hot, but make sure the fan/heater is "OFF".
4.Now START your car, leave the car idle for a while until it is hot enough to open the thermostat and turn the fans on.
After waiting, and as soon as the thermostat opens to cool your engine
You see the coolant level drop, and a few a large amount of air bubbles committing up, this is the trapped air escaping your cooling system.
5. after standard hour of running, if you still see bubble coming out, check your overflow tank and make sure it has coolant in it.
6. when run the engine, liquid level should be at low position. Hold RPM in idle position.
(Turn off the engine as a note the liquid level rise excessively. Waiting for liquid level go lower before restarting the engine.)
7. Once the bubbling stops, Use Liquid Stopper for remaining liquid in the funnel
8. Finish
Pacakge Includes:
1 × MLid
1 × funnel
2×45 degrees Elbow
1 × liquid stopper
1× 5 inches Straight Extension
1 × large cap ONE
1 × Medium Cap B
1 × small cap C
1 × Thread Cap D
1× large Adapter ONE with Gasket
1× Medium Adapter B with Gasket
1× Small Adapter C with Gasket
1× Thread Cap Adapter D with Gasket for GM
1× Thread Cap Adapter E with Gasket for Ford![](https://ae01.alicdn.com/kf/S7c534cb4be204c4c82cd52a074afd3dfv.png)
![](https://ae01.alicdn.com/kf/S0ece5d7fae8148cda0e50d3d1a30413aJ.jpg)
![](https://ae01.alicdn.com/kf/Sd30e90491e7e4d84bfe67bff1f5ff82cT.png)
![](https://ae01.alicdn.com/kf/S3581f26395ad41a29a0e7aa179e89f64S.png)
![](https://ae01.alicdn.com/kf/Sd9b8bf4a02ce4a35b4d9007ab6d4912fL.png)
![](https://ae01.alicdn.com/kf/S70634ac7df7842808bc834f5d7bc6fe1o.png)