Bullet Points:
1¡¢Measuring Thickness: This thickness gauge is used to measure in automatic test mode and on objects with steel substrate ¡¾ (10% of reading + 0.10mm). Most cars are made of steel, if you get 0.00mm or 0.01mm as a result, this is normal and an acceptable error, because most car paint thickness is about 0.1-0.15mm/0*0.01in.
2¡¢Please Note: The accuracy of the product is: ¡¾0.1mm, and more accurate data cannot be obtained.
3¡¢Usage Method: Please press the probe perpendicular to the object, and make sure the surface of the object is smooth and clean.
4¡¢Mini Size: Automatic calibration, data retention. Mini size with LCD display. Providing two units: mm/MIL.
5¡¢Measuring Range: The measuring range is from 0.0 to 2.0 mm, 0 mil to 80 mil.
Features:
1. Please do not use this equipment below 0 degrees Celsius!
2. This tester should not be used to test your household appliances. (refrigerators, ovens, microwave ovens, etc.)
3. There is no calibration plate in the package. It does not require calibration.
How it works:
1. Probe
Before measuring, put the tester and its probe close to the target surface.
2. Display
3. "Test" button
(1). Press the "TEST" button to turn on the tester. Press and hold this button for about 1 second to turn off the tester.
(2). Press the "TEST" key to delete the reading on the display, the display shows "- -".
Specification:
Name: Paint Thickness Gauge
Measuring range: about 0-2mm/0*0.08in
Accuracy: ¡¾0.1mm
Resolution: about 0.1mm
Weight: about 23g
Size: about 7*4*2cm/2.76*1.57*0.79in
Packing List:
1*Paint Thickness Gauge
Notes:
Due to the lighting effects and shooting angles, there is color difference in the product, please understand.
Due to manual measurement, there is a tolerance in the product size.