For BMW CAS2 CAS3 CAS4 CAS4+ Test Platform Tool Support Off-Site Key Programming For BMW F20 F30 F35 X5 X6 I3
CAS Test Platform ? fast check CAS and key working or not without connecting to FOR B-MW
NOTE:
Update: This FOR B-MW CAS cannot be updated
Support System: No need to connect with computer, just follow the instruction steps show
Features:
With this test platform, for BMW CAS4 CAS4 + key can be programmed on the workbench by OBD without opening the machine cover, thus avoiding car power loss and data loss caused by long time unlocking of the CAS4 / CAS4 + on the car.
Off-site key programming.
It can also test whether CAS or key is working properly, which is the preferred platform for locksmith and automotive electronics.
The wire is made of Japanese material, with built-in start button, indicator light,very user-friendly design, and most importantly, high quality and low price.
How does FOR B-MW CAS Test Platform work?
1. Connect and test FOR B-MW CAS3
2. Connect and test FOR B-MW CAS2
3. Note: the red cable of CAS2 / CAS3 should be plugged into the first pin of socket.
4. After the 12V power is connected, the power light ON and the LED light of the CAS test platform will continuously fast flash once a second, it indicates the CAS CPU work well, if the LED light not ON, it indicates CAS is abnormal and need to repair or change.
5. Insert FOR B-MW key into CAS test platform mainframe and you will hear buzzer and see the CAS power adapter green indicator ON, it indicates the key and the CAS work well; otherwise it indicates the key is broken or the key doesn`t program successfully.
Additional Note:
After FOR B-MW CAS test platform is connected with the full-new CAS3, the LED light will not ON, only after the EEPROM data is written into can the LED light on.
FOR B-MW CAS Test Platform help you find out where is the fault:
Connect FOR B-MW CAS test platform to CAS, and after connected with the power, the LED light on or not will help judge the where the fault is.
1. After connected to the power, the CAS test platform LED light on for a long time, it indicates the CPU FLASH data loss, advice you write into the FLASH data from another FOR B-MW model of the same year.
2. After connected to the power, the CAS test platform LED light not ON, it indicates the CPU FLASH data is locked caused by the unstable programmer when writing data, you need to edit EEPROM data.
3. The CAS3 is broken when programming and can`t start the car, then use FOR B-MW CAS Test Platform to connect CAS, after connected to the power if the LED light on for a long time, it indicates the FLASH data missing and EEPROM data is locked.