Best Quality Digiprog3 Full set Digiprog 3 OBD2 Version programmer Digiprog III V4.94 Car Diagnostic Tool With EU/US/UK Plug
Attention :
1.Attached video is a comparison of our correct operation and incorrect operation. You can see that if you click lightly and randomly, the button will not be available. If you follow our instructions, use a little pressure or click with a pen, the buttons will work normally.
2. no computer software included, It can not connect to the computer when you use it. Otherwise it would have the Blue-Screen problem.
3. FTDI Chips is FT232BL&93C46 Chip
4.The password is "1" . After you type "1" and then choose mark " ¡î ". Then you could work with it at once!(click tick" ¡î"not " X", otherwise Digiprog3 will freeze.)
Introduction :
This is the cheapest main unit of Digiprog III with OBD2 cable, software version is V4.94. With the use of the new Digiprog III. Intelligent accessories and extensive manuals are enclosed.
Specifictions :
1. Software Version:Latest V4.94
2. Languages:
Deutsch, English, Espanol,French,Portuguese,Italiano,Turkey,Nederlands.
3.
Best Quality New&Original CPU Display:
4. Full Car List ( contact me to get car list )
Function£º
engine control units, operating hours counter, keys, memory error, motorcycles, etc.DIGIPROG III Machine with full software Include.Intelligent accessories and extensive manuals are enclosed.
Other features:
Service interval adjustments and settings
Assyst processing
Fault memory read-erase
EEPROM programmer
Integrated PC communication
Digiprog 3 How to use £¿
1.Turn off your engine and locate the "Function" button on the front of DigiProg III
2.Press and hold the "Function" button while turning the engine on.
3.Press the "Function" button repeatedly to scroll through the options until you come to "Auto."
4.Press and hold the switch until "-" is displayed. Release the switch when this appears. "Unit" will now appear on the display.
5.Wait until "Cal" appears on the display followed by zeroes, then drive your automobile until one mile clicks over on DigiProg III .
6.Stop the car and then press and release the "Function" button.
Important Tips for Using Digiprog 3:
1. DO connect the Eeprom to the ST01 or ST04 before you connect to Digiprog3, which will avoid Electro static feedback (ESD).
2. Never solder the connections whilst the lead is connected to the programmer, which will damage DigiProg3.
3. DO keep your DigiProg3 in its case when not in Use & keep it in a dry environment at night (don¡¯t leave it in the trunk of your car) If you are using solvents to remove lacquers¡¯ from Eeprom¡¯s ensure that they are cleaned completely, as the solvent will damage the clips.
Package List:
Full Set Version :
OBD Version: