Packaging Details
- Unit Type:piece
- Package Weight:2.1kg (4.63lb.)
- Package Size:15cm x 18cm x 12cm (5.91in x 7.09in x 4.72in)
le="box-sizing: content-box; margin: 0px; padding: 0px; border: 0px; font-size: 13px; line-height: inherit;font-family:Arial,Helvetica,sans-serif; vertical-align: baseline; color: rgb(0, 0, 0);">
CGDI Prog MB for Benz Car Key Add Fastest for Benz Key Programmer
2018-11-12
New Added Authirization - Mileage Repair and GateWay Read/Write 45USD
( It is free If you have CGDI for BMW or CG Pro 9S12 , Plz offer us serial numbers, we will bind with CGDI MB . Or you need to pay for it. )
CGDI Prog MB for Benz Description:
CGDI MB Prog Package List:
1*CGDI MB main unit
1*IR adapter
1*OBD cable
1*USB cable
ELV Repair Adapter for CGDI MB for Benz Key Programmer
1. Automatically forced clearingcontents
2. Enable ELV,Get out of suspended anim ation
3. Virgin,Solve accidental errors
4. Test Write ELV,Determine if it is working properly
5. W204 W207 W212 W209 W906 Reparing locked chip
How to repair for Mercedes W204 W207 W212 ELV with CGDI MB ?
Guide:
Connect CGDI MB via OBD to detect whether the ELV is normal or not, if it is ok, then it supports OBD repair.
Part 1:
Connect to for Mercedes car via OBD, open CGDI MB software, click on “Read ELV data”.
Please connect the clip on the obd cable to the Kline on the ELV plug.
ELV basic info and key info are read out successfully.
The ELV is detected ok and you can repair.
Get the ELV erased password.
Erase the ELV successfully.
Read again and display the related info after being erased.
Part 2: Collect and calculate the IMMO password.
Read out the EIS info.
Enter “Password calculation”, choose “Copy key with key” (If all keys lost, choose “Copy key without key”).
Choose “Other keys” as default, click on “Ok”.
The collecting process will not be displayed here, just follow the message to do until you get the immo password.
Copy the key password and paste it to the EIS.
Save the EIS data (Please save it into the default folder name)
Erase password is calculated successfully.
Click on “Erase EIS”, the message says please plug the simulation key into EIS within 30 seconds.
Real pictures shown as bellow.
Erase the EIS successfully.
Again read EIS related info.
Load the EIS data (saved in the former steps.)
Click on “Write”.
Please insert the simulation key into the EIS in 30 seconds.
Operation real pictures.
Write EIS data successfully.
Again read out the EIS data.
Click on “Synchronize W204 ELV”, after it succeeds, insert the key into EIS to active.
Activation succeed, ready to use.
-->