High Pressure Fuel Pump 35320?2G720 Car Accessory Replacement for Hyundai Kia 2011?2016
Feature:
1. Perfect Fitment: High pressure fuel pump is replacement for Hyundai Kia 2011?2016, replacement for Hyundai Sonata 2011?2014.
2. OEM Part Number: 35320?2G720, 35320?2G730, 35320?2G740, 35320?2G700, 1140506206K, 353202G720, 353202G730, 353202G740, 353202G700.
3. High Quality: Fuel pump is made of steel alloy, anti aging, heat resistant, high mechanical strength, not easy to deformation and durable.
4. Function: Mainly used to increase the pressure of fuel oil, so that the oil can be atomized by injecting into the cylinder through the nozzle.
5. Easy Installation: Easy to install, direct replace the old or damaged one, convenient for using, save your efforts.
Specification:
Item Type: High Pressure Fuel Pump
Material: Steel Alloy
High Pressure Fuel Pump OEM: 35320-2G720, 35320-2G730, 35320-2G740, 353202G720, 353202G730, 353202G740
Fuel Pipe OEM: 35320-2G700, 353202G700
Bolt OEM: 1140506206K
Fitment: Replacement for Hyundai Sonata 2011-2014 with 2.0L 2.4L Engine
Replacement for Hyundai Sonata SE/Limited/2.0T Limited/2.0T Sedan 4-Door 2.0L 1998CC 122Cu. In. l4 GAS DOHC Turbocharged
Replacement for Hyundai Sonata SE/Limited/GL/GLS Sedan 4-Door 2.4L 2359CC l4 GAS DOHC Naturally Aspirated
Replacement for Hyundai Sonata Hybrid Premium/Hybrid Limited/Hybrid Sedan 4-Door 2.4L 2359CC l4 ELECTRIC/GAS DOHC Naturally Aspirated
Package List:
1 x
High Pressure Fuel Pump
How to use:
Installation Step of High Pressure Pump:
1.Detect high pressure pump O?ring and use clean engine oil slightly wetting insert roller tappet into vacuum pump.
2. Rotate the crankshaft until the roller tappet is at its lowest point Insert the high pressure pump into the vacuum pump.
3. Cross tighten the fastening bolt by hand, and cross tighten the fastening bolt with the specified torque of 20N.m.
4. Use engine oil to infiltrate the ball head of the high pressure hose and install it Tighten the lock nut of the fuel distributor indicated by the arrow in the drawing with a wrench.
5. Fasten the high pressure pipe connector with a wrench and tighten the live joint nut of the high pressure tube with another wrench.
6. Install high pressure pipe clamps and use 5N.m torque to tighten clamps. Start the engine after installation to observe whether there is oil leakage on each interface.