Special Reminder:
The working voltage of this product: 11V~18Vdc(12Vdc/200mA)
This product is a dual system: After power on, select the language you are familiar with, and select or GPS system. It will automatically enter the last selected system after 5 seconds of no operation.
Button and Port Function:
1. Left Atmosphere Light: Changes with engine speed or vehicle speed (setting items can be selected)
2. Power Button: Long press for 2 seconds to turn off, long press again for 2 seconds to turn on.
3. Button: Short press to switch the display on the left. Move to the option after entering the setting, and short press to calibrate on the display interface of the inclinometer.
4. Button: Switch the display on the right, and move the option after entering the setting.
5. M key: Short press (press once) to switch the display mode, and confirm the option after entering the setting menu. Long press (press and hold for 2 seconds) to enter the setting, after adjustment, long press for 2 seconds to save and exit
6. Right Atmosphere Light: Changes with engine speed or vehicle speed (setting items can be selected)
7. Suction Cup Holder: Used for viewing glass.
8. Sensitive Components: Automatically adjust the brightness according to the surrounding environment.
9. line interface.
10. Alternate interface.
11. Chassis bracket.
Inclinometer Calibration:
After the meter is placed, short press or button: You hear didi, calibration is complete.
Display Function Abbreviations:
ECT: Engine water temperature
VLT: Voltage display
FUE: source consumption display
RPM: Engine speed
TIM: System time
MIN: Driving time
DIS: Driving distance
MAP: Inlet pressure
OIT: Oil temperature
A/F: Air-source ratio
PSI: Turbine pressure
ASL: Altitude
DIR: Driving direction
TPS: Throttle
KM/L: Kilometers per liter
IAT: Intake temperature
CVT: Transmission temperature
ELD: Engine load
GPS: Number of the satellites are searched
Enter Setting Mode:
Long press the M key for 2 seconds to enter the setting items, short press to select the menu, and short press the M key to confirm. After adjustment, long press the M key for 2 seconds to save and exit.
Select the System Language: CN Simplified Chinese / TW Traditional Chinese / EN English, and other languages.
System Sound Setting: ON Turn on the alarm sound / OFF Turn off the alarm sound.
Speeding Reminder: Alarm when the vehicle speed reaches the set default value of 150KM/h. The setting range is 5-200km/h.
Engine Temperature Alarm: Alarm when the water temperature reaches the set default value of 120°C. The setting range is 50-200.
Engine Speed Alarm: Alarm when the speed reaches the set default value of 6000r/min. The setting range is 1000-8000.
Voltage Alarm Setting: Alarm when the voltage is lower than the set default value of 10.5v. the setting range is 10.0-15.0v.
Speed Error Adjustment: Adjust the parameter value when there is an error between the speed and the instrument panel.
(For example, the meter displays 100 Km/h, and the device displays 105 Km/h. Turn the dial on the dial to adjust the parameter value to 102)
Speed Reset Setting: When the vehicle speed does not return to 0 after the car is turned off.
(if the vehicle speed shows 5Km/h, the equipment is adjusted to 6Km/h)
Voltage Error Adjustment: When there is an error between the voltage and the instrument panel voltage. Fine adjustment can be made.
(If the device displays 0.2V higher than the instrument voltage, the device is adjusted to 98%)
Engine Displacement Setting: When the source consumption error is large, adjust according to the displacement.
(if the car displacement is 3.6L, adjust the parameter value to 3.6L)
Source Consumption Data Adjustment: Fine-tuning when there is an error in source consumption.
(if the device displays 0.2L higher than the instrument voltage, the device is adjusted to 98%)
Backlight Brightness Setting: Auto automatic light sensitivity. 1 is the darkest, and 8 is the brightest.
Ambient Light Setting: RPM speed control color-changing ambient light SPEED speed control color-changing ambient light.
OFF: off ambient light; BLUE: blue ambient light; RED: red ambient light; PURPLE: purple ambient light.
Temperature Unit Setting: °C is Celsius °, F is .
Speed Unit Setting: Km/h kilometers MPH miles.
Statistical Mileage Adjustment: Synchronization of total mileage.
(for example, the total odometer on the dashboard shows that you have driven 30010km, adjust the parameter value to 30010km).
Shutdown Delay Setting: The default is 10 seconds to shut down, the adjustment range is 5-300 seconds.
Shutdown Voltage Setting: Adjust to 13.2V or 13.6 when unable to shut down, adjust to COM mode for cars that start and stop automatically.
System Time Adjustment: It can be adjusted to , the default time is China time (GMT+8)
Restore factory settings: The system restores to the factory preset values. After selecting this operation, short press the M key to confirm.
Performance Testing:
Acceleration Test: 100km acceleration refers to the acceleration time from 0 to 100km/h, which is a power test of the car.
Brake test: The time and distance used after the brake is stopped at a speed of more than 100km/h is a brake performance test.
Troubleshooting Settings:
Scan fault Code: Scan whether the car is faulty, and display fault information.
Clear Fault Code: When the car has a fault code display, short press the M key to clear the fault code.
Read Data Stream: Display all data in the car engine.
Remind Warning:
Please disconnect it if you don¡¯t drive for more than a week. Because the device is a normal electric car battery theoretically standby for 1 month. It is recommended to unplug the device when the car is not used for a long time due to different vehicle conditions.
2 FAQ
1. on the screen, no power
Check whether the cable is tightly connected, unplug it, and plug it in repeatedly several times. If it still does not display, it is recommended to change the car to test, and analyze whether the car diagnosis interface is broken. If the diagnosis is broken, it is recommended to repair the interface. Connect the machine again.
2. It has been powered on, but the screen only displays the voltage, and it will automatically turn off after 30 seconds.
HUD products are only applicable to II and E.
Year of Car Production (II and Ewere used only after 2008).
HUD products do not support I and J, cars produced before 2008.
Please switch to the GPS system for display, and press the button within 5 seconds to select the GPS system.
3. There is an error between the vehicle speed and the dashboard display
Please check whether the unit is correct. Kilometer KM/mile MPH (reference setting item for speed unit switching).
The speed unit is correct when booting up: long press the M button for 2 seconds to enter the system settings, short press to select the speed error adjustment for fine-tuning.
(For example, the meter displays 100 Km/h, and the device displays 105 Km/h. Short press the key to adjust the parameter value to 102).
4. There is an error in source consumption
Check the displacement of your vehicle, set the engine displacement in the system settings to the same displacement (for example, the car is 2.0L, and the parameter value is adjusted to 2.0L). If the displacement is the same, you can also fine-tune the source consumption data in the system settings (such as equipment When the display voltage is higher than the instrument voltage is 0.2L, the device is adjusted to 98%) Suggestion: Since this data is the data of the trip computer, no fine adjustment is required.
5. Cannot shut down
After the car is turned off, the machine has a speed display and cannot be turned off. Select the shutdown voltage setting in the system settings and adjust it to 13.2V or 13.6V, and the car will automatically shut down after 3 minutes of turning off.
6. Step on the brakes and wait for the traffic light to turn off the machine and automatically start and stop the car.
Adjust the shutdown voltage setting in the system settings to COM mode.
7. Extinguished while driving, the engine is off, and a hybrid car.
1. Adjust the shutdown voltage setting in the system settings to COM mode.
2 If it is not resolved, adjust the shutdown delay setting in the system settings to 300 seconds, and the car will shut down after 5 minutes.
3. If it is not resolved, please switch to the GPS system for display, and press the button to select the GPS system within 5 seconds of power-on.
8. Wrong operation causes crash
Whether the 2 interface uses other equipment (locator, tire pressure monitoring, lock lift window folding ELM27).
Modified and installed (central control navigation, electronic throttle accelerator, cruise at fixed speed, and computer system).
The one-key startup, keyless entry, remote startup) will cause crashes, unplug other devices and use this product directly to restore factory settings (see the setting table for details).
Long press the M key to enter the setting menu, short key in the system setting menu to select restore factory settings, short press M to confirm.
If it is not resolved, please switch to the GPS system for display, and short press the button for 5 seconds to select the GPS system.
Inclinometer Calibration:
After the meter is placed, short press or button: You hear didi, calibration is complete
GPS display FAQ:
1. on the screen, no power
Check whether the cable is tightly connected, unplug it and plug it in several times, or directly plug it into the smoking lighter with a USB cable.
2. No speed
GPS is in the state of searching satellites after power on, please move the car to an open road, GPS display above 5 means that it can be used normally after searching more than 5 satellites
3. Can not automatically turn on or turn off repeatedly during driving
If you use the cable, enter the setting menu to select the shutdown voltage setting, and adjust the parameter value voltage to 13.0V or 12.8v
4. Satellite time is not accurate
Enter the setting item: system time adjustment, the short key to adjust time zone time, after adjustment, long press M key for 2 seconds to save and exit.
5. Inaccurate speed
Check whether the unit is correct, kilometers KM/mile MPH, (speed unit switch reference setting item).
When the car leaves the factory, the manufacturer increases the speed displayed on the dashboard by 5-7%. International standards are based on satellite data.
Fine-tune the vehicle speed, if the meter displays 100 Km/h, the machine displays 105 Km/h, adjust the parameter value to 102.
6. Wrong display of driving direction
When there is no speed, the satellite cannot distinguish your driving direction, and it can display normally after the speed exceeds 5KM/H.
7. The speed is still displayed after the car stops
Underground parking lots, tunnels, and flyovers will make the signal unstable when there are obstructions. The satellites will drift. Please drive the car to an open road. If the number of satellites found is more than 5, it will be displayed as normal.
8. After the car is turned off, it will not automatically shut down
When the cable is connected, the machine will automatically shut down after 3 minutes.
If the machine has not shut down after 5 minutes after stopping the flame, adjust the parameter value of the shutdown voltage setting of the setting item to 13.5V.
Specification:
Screen size: about 3.5in
Product size: about 82*115mm/3.23*4.53in
Packing box size: about 13.3x9x11cm/5.24*3.54*4.33in
Package weight: about 310g
Packing List:
1x Host
1x Line
1x USB Cable
1x Small Suction Cup Bracket
1x Manual
1x Double-sided Tape
Note:
Due to the lighting effects and shooting angles, there are color differences in the product, please understand.
Due to manual measurement, there is a tolerance in the product size.
See more product details
1.Rich Language Choices: We provide you with a total of 11 languages including French, English, German, Korean, Japanese, Russian, Spanish, and so on. No worry about languages.
2.Electronic Incline Meter: Real-time detecting of the vehicle left and right tilt climbing/downhill angle, and providing vehicle body attitude change information for outdoor off-road, entering Tibet, and extreme crossing, and ensuring driving safety!
3.GPS Function: With its built-in GPS + Beidou and Galileo chip modules, the auto head-up display can receive up to 32 satellites. It is made to provide high-precision information such as time, latitude and longitude, compass, etc., to meet the needs of outdoor, entering Tibet, self-driving cars!
4.Accurate Diagnosis: The inclinometer car level sensor reads the vehicle with standards through the car interface. The data in the trip computer () is processed by data, providing the driver with practical data information.
5.Alarm Function: The GPS digital speedometer has a low voltage alarm, high water temperature alarm, over-speed alarm, engine failure alarm, etc. for daily use. It gives you comprehensive protection.