Features:
* 100% Brand New and High Quality.
* Creative and fashionable design.
* Fit for most types of car.
* Easy installation, no drilling required and to reduce the fatigue during driving.
Features
* Color: Red
* Material: Aluminum Alloy (this is thin aluminum)
* Sizes: Gas ? Approx. 15cmx7cm, Brake & Clutch ? Approx. 9cmx6.5cm
* Thickness: Approx. 0.5cm
Install:
1. Fit straps with screws and nuts on each pedal pad. Then place the pedal in the right position to fold the straps
around the original pedal.
2. Fold the straps tight around the original pedals. Use the plier sand rags to fix the straps real tight so they cannot move anywhere.
3. Check if straps can be folded around the pedals.
Size and installation range:
1. Two small plates 9cm * 6.6cm (. Length and width), four screws position width about 4.5cm, that is, the width less than 4.5cm, the length less than 9cm of the original car pedal can be installed;
2. The board is about 15.2cm in length and 8.2cm in width, and the width of the four screws is about 4.5cm, that is, the pedals less than 4.5cm in width and 15cm in length can be installed;
3. The installation diagram is attached on the back of the package. The fixing method is that the screw and 7-clip clip are attached to the original car pedal for fixing. There is no need to drill holes, so the installation is convenient.
4. General manual shift car are suitable, of course, there are individual car is not suitable, please measure the size of your car`s pedal before you buy.
Package Included:
* 2 x Universal Non-Slip Automatic Gas Brake Foot Pedal Pad Cover
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.