Smart wireless air pump
Reminder: Please read the operating instructions carefully before use
The electric portable air pump developed! Please read this manual carefully when using this air pump for the first time.
This product is developed for emergency pumping of high-pressure tires for bicycles used in international competitions. It is also suitable for inflating ordinary bicycles, cars, motorcycle tires, balls, inflatable toys and other entertainment and tourism products.
Instructions for use
1. The normal charging time for the first time is 4 hours after charging until each charge is fully charged.
2. Turn on the power button, the LCD screen starts to display, press the switch button to switch between the four air pressure units PSI, BAR, KAP, KG/CM©÷, select the unit you want, and press the plus or minus button to set what you need The air pressure value, after the flashing stops, press the power button to start the inflation.
3. Short press the light button to switch between motorcycles, bicycles, cars, and balls.
Display motorcycle mode default 28PSI
Display bike mode default 120PSI
Display car mode default 36PSI
Display ball mode default 8 PSI
4. Define and set the air pressure value by yourself. You can short press ¡®-¡¯ or ¡®+¡¯ to adjust the preset pressure value, and long press ¡®-¡¯ or ¡®+¡¯ to quickly adjust the preset pressure value.
5. Press the power button to start inflation. When the inflation pressure reaches the pressure value you set, the smart inflator will automatically stop the inflation work immediately.
6. When the air pump starts to detect no air pressure, it will automatically stop working for about 40 to 50 seconds.
7. When the inflation is finished, unscrew the air tube to complete the inflation, and be careful to connect the tire inflation connector to see if it is hot; there will be a small amount of air leakage at the moment of unscrewing the connector, which is normal.
8. If it is judged that the tire pressure is too high, you can use the tire inflation connector to screw on the appropriate position on the valve core to deflate and reduce the pressure.
9. Unscrew the tire inflation connector from the main engine, put the air cylinder away, and place it in a dry, ventilated and safe place.
1. Function button description
: Short press the setting key to switch the unit, switch PSI, BAR, KPA, Kg/cm©÷, long press the setting key to switch the default value of car, bicycle, motorcycle, ball mode.
: Long press for three seconds to turn on, and lightly pressagain to start the motor to inflate.
: Long press to turn on the light, short press again to flash slowly, short press again to flash quickly.
£ºAir pressure setting "+" key, long press can increase quickly.
: Air pressure setting "-" key, long press can quickly decrease.
: Type-C charging port.
2. Technical parameters
1. Measuring range: 3~150PSI
2. Measurement accuracy: ¡¾1.5PSI
3. Resolution: 0.5PSI
4. Temperature range: -10 to 80 degrees Celsius
5. Working voltage: 7.4V
6. Input voltage: 5V/1~2A
7. Working current: 1-5A
8. Maximum current: ¡Â5A
9. No-load current: ¡Â2A
10. Charging Type-c, charging time ~ 4 hours
11. Unit selection: press to switch the unit, PSI, BAR, KPA, Kg/cm©÷
12. Three sets of air pressure modes are preset: basketball 8PSI, motorcycle 28PSI, car 35PSI
13. Control accuracy: ¡¾1.5PSI
14. Illuminated work light + police light SOS
15, the preset air pressure is full and automatically stop
16. With display value of current working temperature
3. Accessories description
1. H8 air pump host 2. Inflatable tube 3. Inflatable accessory connector 4. USB charging cable
4. Matters needing attention
1. It is forbidden for children to use the inflator! Keep it out of the reach of children! Do not insert the trachea into the mouth, ears and eyes of living animals, and do not use the inflator as a toy!
2. It is forbidden to use this gas cylinder near flammable and explosive liquids and gases (such as gas stations)!
3. People should not walk away when the inflation is in progress, and the machine must be stopped for 10 minutes after continuous use for 10 minutes.
4. When there is abnormal noise or the temperature is too high during inflation, please turn off the machine immediately and let it cool down for at least 15 minutes. Be careful of hot hands when removing the trachea.
5. The product is resistant to rain, water, and impact.
6. If the gas cylinder is not used for a long time, it must be stored in a dry and closed place. If it is stored for a long time, it is recommended to charge it once every three months.
7. Before using the rechargeable pump, check whether it has been charged enough. The first charge is 4 hours, and each subsequent charge will last until it is fully charged.
Tips
For the safety of you and others, please use the pump and its accessories in accordance with the instructions provided by the manufacturer.
Use methods not mentioned in the manual may cause danger.