Electric Heated Handlebar Comfortable Energy Saving Heated Grips for ATV for Motorcycle
Feature:
1. Durable Material: Made of high quality TPV material, high temperature resistance, corrosion resistance, durable, and has a comfortable grip feel.
2. Safe and Non Slip: The handlebar surface is textured and non slip, the elegant new motorcycle grip design guarantees your safe driving.
3. Fast and Accurate: Five level thermostat, accurately adjusts the optimal temperature, and has a revolutionary heating structure to provide heat faster than ever before.
4. Convenient: Energy saving electric hand special switch, high and low temp can be adjusted at will, and the temperature can be changed without removing the hand from the handle.
5. Universal: Universal accessories, suitable for all motorcycles or ATVs with a handlebar diameter of 22mm/0.9in.
Specification:
Item Type: Motorcycle Handlebar
Material: TPV
Color: Black
Input Voltage: 9-18V
Working Voltage: 12.4-16V
Processing Temperature: 0-50¡ÆC
Power: About 20-40W
Applicable Models: Approx. 22mm/0.9in General
Package List:
1 x Pair of Left and Right Handles
Note:
1. If you no longer need it, you can cut and remove the handle cover with a knife. Please follow the respective removal methods for metal handles.
2. If the cable is too hard or a strong pull will cause danger, be sure to pull the cable loosely before pulling it out.
3. Please use a thick cardboard or a scraper to spread the adhesive thinly, if it is too thick, it may ooze and cause stains.
4. Manual measurement, please allow some errors.
How to use:1. Pour the parts cleaning agent or lubricant into the middle of the handle cover and the handle and shake it back and forth on the handle cover, then you can pull out the handle cover and save it for future use.
2. Please pull out the throttle cable from the throttle core before replacing the throttle core in the accessories.
3. The cable inside the throttle core is loosened a bit, if the throttle core is replaced, please adjust the tightness of the throttle cable to a proper tightness, when adjusting, make sure that the throttle valve can operate smoothly.
4. Coat the adhesive on the handle,and then insert the handle cover, there is a hexagonal screw on the controller side , be sure to loosen the screws before inserting, and then tighten them at last.
5. After the power is turned on, the indicator light flashes three times and enters the standby mode (green light flashes normal, red light flashes less than the operating voltage). The heater has five temperature adjustments, through the switch control, the light changes from blue to red, and the output will gradually increase at a rate of 20% each time. If the light flashes or goes out, the voltage has dropped and you need to replace the battery or the wiring. Connection method: red connect to positive pole, black connect to negative pole.