8 LEDs Car Rear View Reversing Video Camera 170° Angle IR Night Vision Parking Camera
Description:
The reversing camera is a night vision car camera with 8 LEDs (7 white LED+1 IR LED) used primarily in car reversing
when connected to rear view monitor, providing guard, security and high quality image.
Power saving, portable, waterproof, easy to install and use.
This reversing camera is perfect for Car, MPV, Truck or Lorry, with color vision, provide good picture on your screen.
It can perfectly solve the issue of bad car rear view effect and help reduce incidents and accidents abrasion well.
Features:
1. High-definition and 170 degree viewing angle.
2. Built-in guideline for instant distance calculation.
3. Versatile compatibility can be connected to any type of monitor.
4. Suitable for safety and security.
5. Waterproof and can be installed on your license plate.
6. Applicable to all type of vehicles.
7. Easy installation and can be installed in several ways.
8. Made of high quality and durable material.
9.Connect with your in-CAR DVD player or Rear View Mirror or GPS
Specification:
Image device | 1/4 inch color CMOS | TV System | PAL/.NTSC |
Effective pixels | 628*582 pixels | Sensing area | 5.78*4.19mm |
Sync. cystem | internal | Resolution | 420 TV lines |
Lens | 0.3mm/2.8mm/1.8mm | S/N ratio | More than 48db(AGC-OFF) |
Electronic shutter | 1/50-1/10,000 seconds | Video output | RCA connector, 1.0vp-p,75ohm |
Current consumption | <=150mA | Power supply | DC 12V |
Operating temperature | -30 to 50ºC, RH95% Max | Storage temperature | -40 to 60ºC, RH95% Max. |
Led quantities | 8 LEDs | Minimum illumination | 0.3Lux/F1.2 |
2.4G Wireless Module adapter for Car Reverse Rear View backup Camera cam
Wireless module for car reverse camera that enables normal reverse camera
This listing is for the wireless module only.only can use one camera
How to Install a Camera with the Wireless Module
Take out your stock license plate light at the back of your car.
Fix the camera to where the stock license plate light was.
Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power
Connect the wireless module (transmitter) to your camera via the two cables - one plug for AV output and one plug for power
Connect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and black wire for negative
Connect the wireless module (receiver) to your car monitor - yellow plug for AV input.
Connect the wireless module (receiver) to your car battery or cigarette lighter to get the power - red wire for positive and black wire for negative
You will see the images when your car is in reverse shift.
Please note that this module is for in-car monitor or DVD, not for GPS.
Package includes:
1 x Car Rear View Camera
1 x Wireless receiver
1 x Wireless transmitter