/piece
/piece
/piece
/piece
/piece
/piece
/piece
/piece
2CH Video 4.3 " Foldable TFT LCD Color Camera Rearview Mirror Car Monitor
Description:
This 4.3" Car Rear View Monitor helps in preventing accidents
while driving in reverse by avoiding children, traffic, pedestrians, toys and
pets while backing out of the driveway or parking space. It fit all
CCTV camera, car Reversing camera, car DVD player
Features:
100% brand new and high quality
2-channel video input: V1/V2 auto switching (No sound)
Foldable design, easy to carry
Low power consumption
PAL/NTSC auto switch
Specifications:
LCD size: 4.3 inch
Resolution: 480H*240V
Visible Area: 72 x 55 mm
Connectors: RCA Female*2 + 2.1*5.5mm DC Jack
Power Supply: DC 12V
Dimensions: 1123mm (L)*72mm (W) *11mm (H)
Note:
please Connect the Rearview camera\'s power cable with Reversing lamp,
and connect camera\'s video cable with LCD\'s yellow cable (Video
V1),then the LCD will show Camera\'s video when you are Reversing, and
stop playing movie (auto switching)
170 Wide Angle HD Night Vision Car Rear View Camera
Anti fog glass
RCA connector
High grade of waterproofing: IP66.
High-definition and 170 degree wide viewing angle.
Applicable to variety of vehicles: car, truck, RV, etc.
Snap-in design, it is easy to install.
Its simple and modest design and small size won\'t draw any attention.
It helps to avoid incidents and accidents abrasion well.
TV system: PAL
Horizontal Resolution: 420 TV lines
Effective Pixels: NTSC:510(H) * 492(V)
Minimum Illumination: 0.5 Lux
Lens: 13.5mm
View Angle: 170 degree
Sync. System: internal
S/N Ratio: >48dB
Electronic Shutter: 1/50 to 1/100,000 seconds, 1/60 to 1/100,000 seconds
Video Output: 1.0Vpp, 75Ohm
White Balance: Auto
Power: DC 12V
Current Consumption: 90mA
Operating Temperature: -20 to + 70°C, 95% RH maximum
Storage Temperature: -40 to + 100°C, 95% RH maximum
Water-proof: IP66
Image Reverse: Left-right mirror
Installation:
Connect the yellow video output connector to terminal display device.
Connect the black power input connector to power output device.
Reversing camera It can help us to see all the circumstances behind.
Specifications:
Original box: YES
Color: Black
Video Cable Length: 6m
Power Supply Cable Length: 1.2m
How to Install a Camera with the Wireless Module
Take out your stock license plate light at the back of your car.
Fix the camera to where the stock license plate light was.
Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power
Connect the wireless module (transmitter) to your camera via the two cables - one plug for AV output and one plug for power
Connect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and black wire for negative
Connect the wireless module (receiver) to your car monitor - yellow plug for AV input.
Connect the wireless module (receiver) to your car battery or cigarette lighter to get the power - red wire for positive and black wire for negative
You will see the images when your car is in reverse shift.
Please note that this module is for in-car monitor or DVD, not for GPS.
Package Includes:
1 x 4.3" TFT LCD color monitor
1 x Power cable
1*100% Brand New Car Rear View Camera
1 * User manua(Instructions for the unified version,the specific please see the page product description)
1*wireless receiver
1*wireless transmitter