5 ¿þÀÌ Æijë¶ó¸¶ ¿îÀü ·¹ÄÚ´õ AHD Ä«¸Þ¶ó, ÀÚµ¿Â÷ DVR ÁÖÂ÷ ¸ð´ÏÅ͸µ, ¹ü¿ë ÀÚµ¿Â÷ ¼¶ó¿îµå ºä ½Ã½ºÅÛ
Feature:
1. 5 Way Panoramic Camera: The car surround view system is of great help in various driving situations, such as parking, eliminating blind spots and cornering on narrow roads.
2. Large Visible Range: Blind spot on the left front of the car, blind spot on the left rear of the car, blind spot on the front right of the car, blind spot on the right rear of the car.
3. Flameout Collision Recording: After flameout, if the parking monitoring encounters a collision, it will automatically start after 2 seconds, and the video will be recorded for 30 seconds.
4. Excellent Driving Experience: Professionally manufactured rearview camera system provides you with an excellent driving experience, dependable to use.
5. Easy Installation: Easy to install, can be installed on the left and right rearview mirrors and front windshield, practical to use.
Specification:
Item Type: Panoramic driving recorder
Monitor Size: Approx. 5in/12.7cm
Visible Range: Car left front, left rear, right front, right rear blind spot
Resolution: 1920x1080
Refresh Rate: 30 frames/sec
Peak: 1Vp-p
Impedance: 75¥Ø
Video Input: Five input (support CVBS or AHD720P or AHD1080P)
Video Output: One output (support CVBS or AHD720p)
Video Recording: Memory card (less than or equal to 128G)
The Video Format Is: MOV
Audio: Microphone input
Video System: PAL/NTSC (Automatic Identification, Note: The camera needs to be connected before power on)
Operation Screen Mode - Wire Control: High level trigger (the fifth channel)/wireless handle/fader button/button remote control
Positive/Mirror Selection: Select OFF/ON in the menu
Host Protection Mode: Power loss protection (automatic shutdown when the voltage is lower than the set value)
Default startup screen
Power Consumption Host Operation: 3W
Output Power: 5V
Rated Voltage: DC 5V
Working temperature; 0¡É-+65¡É
Remote Control Battery: 1 x button battery CR2025 80mah (built-in)
Square Control Battery: 1 x button battery CR2025 80mah (built-in)
Fitment: Universal for car modification
Package List:
1 x Monitor
10 x Cable Clip
1 x Mounting Bracket
1 x Usb
1 x Sticker
2 x Screw
2 x Remote Control
1 x Antiskid Pad
2 x Fixing
1 x Manual
3 x Camera
4 x Power Cord
How to use:
1. Install the screen base;
2. Paste the rubber pad on the console;
3. Insert the memory card ? support 128G (need to purchase separately);
4. Front view installation and wiring;
5. Left?view L installation plug (V3V4 is connected to the left?view);
6. Right view R installation plug (V1V2 is connected to the right view);
7. To insert the car charger, it must be connected to the 21A interface;
8. The green line is the fifth trigger line;
9. Put the wire under the foot pad, the interior of the car is more beautiful;
10. Use the fader button to switch the screen;
11. The wireless square control is installed on the steering wheel, you can use the remote control to enter the menu and adjust the parameters.