Packaging Details
- Unit Type:piece
- Package Weight:1.6kg (3.53lb.)
- Package Size:32cm x 21cm x 10cm (12.60in x 8.27in x 3.94in)
/piece
/piece
/piece
/piece
/piece
/piece
VVDI 2 Key Programmer Full Version
Top 7 Reasons to Get VVDI2:
1. This VVDI2 Full Package Contains Basic Function + VW + B-MW + Por-sche+ PSA + AU-DI Generation 5 Function + B-MW OBD Fucntion + B-MW CA-S4 Functions + Tango + J2534
2. VVDI2 Full Package Covers All the Functions of VVDI, VVDI 5th IMMO Adapter, BM-W Multi Tool & CAS Plus for BM-W Multi Tool
3. Support VW, A-udi, B-MW, Por-sche & PSA
4. Update Online Free Lifetime
5. Latest Version: V4.7.6 VVDI2 V4.7.6 Software Free Download
6. Newly Add BM-W FEM/BDC and Copy 48 Transponder by OBDII Function,Both Need to Buy Alone
7. If you have iKeycutter CONDOR XC-MINI, we can open the authorization to read pin, cs, mac.
VVDI2 - BM-W FEM/BDC System (function released and available, just no user manual)
Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding
Notes:
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if \`get key info\` the type not support, it will show:customer should use "BM-W E-sys software" program FEM/BDC system.then programming FEM/BDC system with VVDI2-B-MW
4.when operation on \`programming FEM/BDC system\`interface,please don\`t close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.£¨FEM 95128 chip, BDC 95256 chip£©usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car
or the car with window problem)please use "B-MW E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.
VVDI2 V4.7.5(2017-10-16)
===== Support software version ====
VAG V4.7.5
BM-W V4.7.5
Po-rsche V4.7.5
PSA V4.7.5
Passthru J2534 V4.7.5
Online Update Tool V4.7.5
Quick Start V4.7.5
You can find the detail update information from Readme in newest software, Mainly include:
1. Support copy 48 transponder(96 bit, All car with ID48 transponder), (Menu->Key Learn->Copy 48 transponder(96 bit, All car with ID48 transponder))
About copy 48 function on VVDI2:
(1). Authorize copy 48 function(96 bit) require buy license and a extra 48 emulator
(2). Every success calculate will cost 100 remote points
(3). Copy 48 function now support all the cars with ID48 transponder: VW, Au-di, Sko-da, Vol-vo, Ho-nda, Bu-ick, Cadi-llac, Fi-at, GreatWall, Zhonghua etc
(4). Copy 48 function no need OBDII connect
2. Bugfix
Special Function:
Including all VVDI functions, improved and more stable
More vehicle coverage, multi Immo functions
New added plug-in function and reserved connectors to include all VVDI functions
VVDI PROG includes all the VVDI functions, The function of Tango, Remote control generation and chip identification is improved, And also the coil¡¯s stability has been enhanced.
More ever, Users do no need to connect VVDI PROG with computer or other devices to identify chip or detect remote frequently.
Add more vehicle models
VVDI supports diagnostic function only for VAG groups, But VVDI PROG has achieved multi brand vehicle diagnosis and supports part of vehicle immo programming function and software online upgrade.
VVDI PROG can replace lots of customized devices. Users do not need to purchase specific OBD tool for specific vehicle makes which will save you a lot.
Plug-in function, reserved connectors
VVDI 2 can act as a multifunction programmer to connect plug-ins, and read & write IC and CPU data.
Can read and write for Be-nz IR key, Can program key for old and new for Me-rcedes?Be-nz, Can connect for B-MW plug to realize OBD function, And meanwhile reserve some connectors for further uses.
The core function is to detect the remote control frequency:
Automatically identify chip type
Support multi-function on for VW vehicles
Read for BM-W ISN
Key programmer
Remote control programmer
J2534 compatible Adapter
1.Detect key frequency, automatically identify chip type
The test result can show on the main unit display, no need to connect computer
2. Support VAG vehicle diagnostic function
Read & write Immo4/Immo5 system
Learn key
Program BCM remote
K-Line instrument immobilizer box
Correct odometer
Program control unit
Unlock Immo1/Immo2 firmware protection
Support data manipulation tools
3. Support OBD functions on for BM-W vehicles
Correct odometer
Generate key
Unlock Key
4. Fix CAS4 EEPROM key programmer
Generate specialized chips
Immobilizer data processing tool
Other key tools
Generate remote control
5. Passthru J2534 Introduction
With built-in switch matrix, it supports third-party diagnostic software including:
ODIS, Toyota TIS techstream etc. To perform VVDI2 diagnostic function, third-party diagnostic software should be compatible with J2534 function.
VVDI 2 Superiority
VVDI technician has devoted themselves to VVDI free update online and update service in the pass five years. This is what VVDI has been widely respected and ranked as a power tool.
There is no doubt that the more power and high-end configuration VVD2 will inherit the fine traditions.
Apart from free update online service and system optimization, more powerful functions and vehicle models (Like for Por-sche) will soon be available via update. And other more functions, you name it.
VVDI2 goes beyond than VVDI in function, connectors and vehicle coverage etc. After all, VVDI belongs to locksmith tool while VVDI2 becomes a comprehensive locksmith device.
VVDI2 ? VAG software:
VAG software support VAG cars: VW, Au-di, Se-at, Sko-da, 4 th immobilizer Pors-che, 4 th immobilizer Bentley .
Mainly include: Diagnostic, 4 th immobilizer, 5 th immobilizer, key learn, BCM remote control, Engine control unit, Kline instrument and immobox, adapt unit, component protection,dump tool etc.ou can find detail in VVDI2 ? VAG User Manual
VVDI2 ? BWM software
BM-W software support cars: BM-W. Support types can be find in Mainly function: Read/Write EWS, read CAS information£¬Read/Write CAS EEPROM,
Read/Write KM stored in CAS, synchronization DME with CAS, synchronization CAS with ELV, Key Learn(immo)£¬File Make Key, Unlock Key, File Change KM, CAS Repair etc OBD Flash ISTA version only need 10 minutes. (No extra power. No backup CAS EEPROM and FLASH).
VVDI2 ? Transponder Programmer software
Transponder programmer software is a multifunctional immo transponder tool. Mainly include: transponder programming, special transponder, immobilizer data tool, other key data, prepare remote etc.
Customer Feedbacks:
-Transfer instrument cluster in 2010 A5 + Mileage change ..YES GOOD
-Make OEM key for 2006 Au-di A6 ... YES GOOD
-Change mileage in 2006 Au-di A6 ... YES GOOD
-READ Kessy EZS OBD A-udi A6 2006 ...YES GOOD
-READ BCM2 (BDM) 2010 A-udi A4 ... YES GOOD
-All functions on older cars year 2000-2004 era working well ...YES GOOD
-Successfully add a key bcm2 on a 2013 au-di a5.
-2007 Au-di A4 B7 RB8 crypto - mileage correction ok
-Au-di BCM2 add spare key by obd worked fine, and I did one on a 2013 A5 and it worked flawlessly.
-A6/Q7 EZS Kessy: Added a dealer key (remote sourced from the dealer) without issues. Seemed to read everything properly but I had a working key to begin with.
-Au-di A6: Testet with A6 read kessy working, learned new key
-Sko-da Octavia 2006: got CS & PIN , programmed key fine, but not remote programming.
-VW passat. B5: Pulled PIN, programmed key, corrected miles.
-VW Passat B6 2009: Pulled PIN but couldn\`t get 6 bytes CS, needed comfort dump.
-VW Transporter T5 2006 : Pulled PIN Programmed key, no remote programming.
-Au-di A4 2006 : mileage correction success .
-Au-di A6 2003: Mileage correction fail. car not start. remove battery terminal. car start.
VVDI2 Lables Display:
0=(VK-01) key programmer
1=(VJ-01) Passthru J2534
2=(VV-01) VW 4th
3=(VV-02) VW 5th
4=(VB-01) BM-W OBD Function
5=(VB-02) BM-W CAS4 Function
6=(VP-01) Por-sche
Package List:
VVDI 2 Main Interface
5th BDM Programmer
OBD2 Cable
Remote Programmer
USB Cable
-->