2. Two installation methods, A pillar installation + center console installation. The first stopwatch that can be installed on the A-pillar.
3. Currently, the first screen can rotate 270 degrees.
4. The first HUD small code table reaches the highest resolution of 240*240 for high-definition display.
5. There are three types of turbine pressure: PSI, 100KPA, bar. The turbine value can be adjusted and calibrated to increase the fuel consumption unit KM/L.
6. Up to 10 Hz refresh rate, there will be no stall delay phenomenon.
7. The GPS function can be displayed at the same time in the OBD mode, which is currently the first in the industry. When the speed is switched to MPH per mile, the water temperature will be automatically switched to Fahrenheit degrees, the single driving distance will also be automatically switched to Miles, and the fuel consumption will also be automatically switched to gallons MPG.
8. 8 kinds of display screens can be switched.
9. Function: OBD2 mode: speed, rpm, water temperature, voltage, fuel consumption, clock, single travel distance, single travel time, oil temperature, turbine pressure, acceleration test, brake test, overspeed alarm, engine failure alarm, elimination of fault code, water temperature alarm , speed alarm, voltage alarm, mile switch, fatigue driving reminder, automatic and manual brightness adjustment.
10. GPS mode: speed per hour, altitude, number of satellites, clock, mileage of per trip, time of per trip, compass.
Screen size: 2 inches LCD
Screen resolution: 240*240
Bare metal size: about 9.7*6.1*4.9cm/3.82*2.40*1.93inch
Bare metal weight: about 40g
Line length: 175cm/68.90in
Note: The following years and types of cars are not compatible
1.It is generally suitable for models after 2012. If you are not sure whether the model year is suitable, please comfirm with us before purchase.
2. electric cars can¡¯t use .
A500
Product Function:
1.OBD mode information display: vehicle speed, water temperature, voltage,fuel consumption, RPM, single mileage, total cumulative mileage, travel time, system time, intake pressure,oil temperature, air-fuel ratio,turbopressure,intake pressure, acceleration test, brake test, read data stream.
Alarm:Overspeed alarm, Speed alarm, High water temperature alarm, Low voltage alarm, Engine fault alarm, Clear fault code, Free switching between kilometer and miles,KM/h & MPH Switchfreely,°C & ¢µswitch freely.
2. GPS mode information display: speed, travel time, satellite time, altitude, number of satellites, driving direction, single mileage, voltage, acceleration test, brake test.
Alarm: Overspeed alarm, Low voltage alarm, Free switching between kilometer and miles.
Product Highlights:
1.-OBD + GPS dual system, can work on all cars.If You Car OBD2 Protocol is Not Open, You Can Choose GPS Working System, GPS is Compatible with All Cars
2. -Two installation methods:1) stand on dashboard, 2) upside down on windshield
3. -The bracket can be rotated in 360 degree to adjust the visual angle and height.
4. -Speed Unit KM/H & MPH Switch freely;
5. -Turbine pressure: PSI and KPA switch freely.
6. -Fuel consumption units: KM/L and L/100km
7.-The first HUD to show all data of OBD+GPS dual mode, no need to switch working system if OBD2 protocol is compatible.
8.-Add AMBIENT LIGHT:the default color is in Blue
When there is an alarm,change to red and flashing (remains the brightest) to Remind the driver.
9.-Modern design and high quality: New tooling design, driver can see the clock (right corner) all the time.
10.-9 kinds of different interface, you can choose any display interface you prefer.
11.-Support Update Software Remotely (Optional): Latest software updated in September, 2021
12.-Accept OEM & ODM Orders: Add Start-up Screen with your logo; Customize Package; Add new functions and display interfaces...
Default working mode is OBD. If your car doesn`t have obd port or obd2 is not compatible, pls go to ``set`` and off OBD, it will switch GPS. GPS will work on all vehicles.
Notice:
OBD2 applicable models:OBD2 is applicable to OBD2 gasoline vehicles produced in the United States after 2004, and OBD2 gasoline vehicles produced in other countries after 2008.
OBD2 models are not applicable to the following models:
Incompatible:American models: For Dodge,For JEEP, For IMSEOER, For Chrysler and cars manufactured in the United States before 2004.
Incompatible:French and Italian cars are not available: For Fiat, For Maserati, For Lamborghini, For DS, For Peugeot, For Citroen, For Renault, For Simca, etc.
Incompatible:Some Japanese cars are not available: Not For Suzuki, Not For Mazda 6, Not For Infiniti (QX50 Q50 Q501), 2013 Not For Toyota AVANZA, Not For Lexus (is250, ex250, ES300H), Not For Honda (Jazz,
CRV) and cars produced before 2008.
Incompatible:some Korean cars (2013 For Hyundai Sonata, 2017 For Kia Soul PS, etc.)
Incompatible:Hybrid and diesel cars, pickup trucks, RVs, cars equipped with modified car computers, For Swiss Volvo, For Chrysler Group, For Fiat Group and all brand models.
Incompatible:German cars before 2004
The above models cannot use OBD2 models, please use GPS models.
A600
¡¼OBD2 + GPS¡½Dual system, suitable for almost all car with OBD socket.
¡¼3 Screen Interface¡½The latest 3 screen design, data more intuitive and better looking modeling.
¡¼9 Display Interface¡½Display vehicle data such as speed, engine RPM,turbo, battery voltage, fuel consumption, coolant temperature, oil temperature etc.(In particular, looking directly at the turbocharging pressure gives you a different driving experience.)
¡¼Two Installation Methods¡½Can put on dashboard or stick to windshield.
¡¼ Alarm Function ¡½You can freely set multiple levels of speed limit,when reach the set speeds, there will be a beep / When exceed the maximum speed limit, the screen will flash red and emit a continuous beep.
¡¼Plug and play¡½No need for broken wires and complicated installation.
¡¼Direction Indication¡½Newly added E S W N direction tips.
¡¼High Precision¡½Up to 10 Hz refresh rate, no stuck delay.
Warm Prompt:
If you need to install two meters at the same time, or the OBD plug has been occupied, you can solve this problem through the OBD extension cable£¨Our package is not included and needs to be purchased separately!£©
Features:
- 100% New and high quality.
- Simple installation, no broken wire.
- The bracket can be rotated in all directions to adjust the visual angle and height.
- Speed Unit KM/H & MPH Switch freely: Turbine pressure: PSI and KPA switch freely. Fuel consumption units KM/L and L/100km.
- The first HUD to show all data of OBD+GPS dual mode, no need to switch working system if OBD2 protocol is compatible.
- Light sensitive design, automatic adjustment of day and night screen brightness, you can also manually set the brightness.
- New tooling design, driver can see the clock all the time.
Our OBD + GPS dual system, can be suitable for all cars,but OBD2 and GPS models are differences in useful functions(In OBD mode, GPS function can be displayed at the same time)
¡¼OBD2 mode information display¡½Vehicle speed, water temperature, voltage, fuel consumption, RPM, single mileage, total cumulative mileage, travel time, system time, intake pressure, oil temperature, air-fuel ratio, turbine pressure, intake pressure, acceleration test, brake test, read data stream.
Alarm: Overspeed alarm, Speed alarm, High water temperature alarm, Low voltage alarm, Engine fault alarm, Clear fault code, Free switching between kilometer and miles, KM/h & MPH Switch freely, °C & ¢µ switch freely.
¡¼GPS mode information display¡½Speed, travel time, satellite time, altitude, number of satellites, driving direction, single mileage, voltage, acceleration test, brake test.
Alarm: Overspeed alarm, Low voltage alarm, Free switching between kilometer and miles.