|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- Ư¡: Universal radiator cooling fan fit various vehicles and engines.
- Á¦Ç° Áß·®: 2.8
- Ç°¸ñ ³ôÀÌ: 10
- Ç°¸ñ ³Êºñ: 45
- Á¦Ç° ±æÀÌ: 48
- ºê·£µå À̸§: NoEnName_Null
- ±Ù¿ø: CN (Á¤Ç°)
- Universal Slim Fan Push Pull Electric Radiator Cooling Mount Kit: This is a great electric fan fits for radiators, oil coolers, transmission coolers, condensers and more.
- DESIGN: im design provides excellent engine bay clearance.Good heat resistance and corrosion resistance ensure a long service life for the electronic radiator.
- PUSH/PULL: electric radiator cooling fan is reversible. It can be used as a puller.
- WIDE USE: Universal radiator cooling fan fit various vehicles and engines. It depends on the size of your radiator. Auxiliary equipment for cooling the entire engine compartment, including radiators, air conditioning systems, intercoolers, oil systems, and transmissions.
- SERVICE GUARANTEE: If you have any questions while using it, please feel free to contact us and send an email to us. We will provide you with satisfactory service.
- Fitment: It`s a universal fit cooling fan.Make sure the fan size is correct with your original
- Function Of Electric Fan: Keep the engine cool. It can also preheat and cool faster, extend the service life of water pump, reduce fan noise, improve air conditioning performance, and increase gasoline mileage.
- Maximum Fan FAN CFM: 1000CFM
- Maximum Fan RPM: 2000¡¾10% RPM
- Quantity: 1 PCS
- Quantity of Blades: 10 Blades
- Fan Size: 16\
- Fan Diameter: 16.82\
- Color: Black
- Voltage: 12 Volts, 120W
- Style: OE Fitment or Universal Condensing fan Replacement, Push or Pull Type
- AMP DRAW: ¡Â11 AMP DRAW
¿É¼ÇÁ¤º¸[(173)1x16 inch 12V 120W]
Description:
100% Brand new radiator cooling fan blade for Universal use
12V, 120W
¡Â11 AMP DRAW
10 Blades
Color: Black
Fan Diameter: 16.82"
Fan Thickness: 3.27"
Maximum Fan CFM: 1000 CFM
Maximum Fan RPM: 2000±10% RPM
Easy direct installation, require NO modification
OE Fitment or Replacement, Push or Pull Type
Package Includes:
Fitment:
About this item:
?¡¼Radiator Cooling Fan¡½ 12V 120W 16 Inch radiator cooling fan with mount brackets and tie straps kit. Auxiliary equipment for cooling the entire engine compartment, including radiator, A/C system, intercooler, oil system, and transmission
?¡¼Slim & Push/Pull Design¡½Slim design provides excellent engine bay clearance for engine modification. Direct bolt-on installation and also reversible. It can be used as a puller.
?¡¼High-performing Specification¡½ Maximum Fan CFM: 1000 CFM; Maximum Fan RPM: 2000±10% rpm; Blade Length:16 Inch; Number of Blades: 10 Blades; Blade Type: S-Curved. Overall Diameter: 16.82" inch, Overall Thickness:2.36 inch ;Amp Draw: ¡Â11 amp ;Watts:120W.
?¡¼High Quality¡½Lightweight Plastic Durable Material. Provides optimal flow, reduce pump noise. Good heat resistance and corrosion resistance ensure a long service life for the electronic radiator.
?¡¼Universal USE¡½Radiator cooling fan fit various vehicles and engines. Check the size of your radiator. If you have any questions while using it, please feel free to contact us. We will provide you with satisfactory service.
Puller Fans & Pusher Fans:
£¨This fan assembly is designed for both PUSHER and PULLER applications.To change airflow direction from the factory setting,you MUST follow the directions below or performance will be compromised!
HOW TO CHOOSE A ELECTRIC RADIATOR COOLING FAN?
Measure the area with an existing fan, radiator, and shroud removed to find out how much room you have to work with.
About diameter, you should get one/two fan that covers as much of the radiator as possible.
Always keep some clearance between the fan motor and the engine.
Straight blades move more air but make more noise. On the other hand, curved blades are quieter, but not more as much air. Choose according to your needs.
Puller fans provide more cooling capacity than pusher fans.
Always choose puller fans If space is an issue then use a pusher fan.
Warning: Installation of accessories should only be undertaken by those with mechanical knowledge and are familiar with working on vehicles,Always use eye protection (goggles,safety glasses or shield). Park the vehicle in a well lit area,on level ground and apply the parking brake.Only work on a cold vehicle that has bean sitting overnight, failure to do so will result in severe burns and injury.Before starting the vehicle,make sure no tools or any other items are left under hood that could interfere with or be drawn into moving parts of the engine.
Product Show:
STEP 1
Take the four mounting feet provided and attach them to the slots on the outside of the fan housing at the desired locations around the perimeter.
Please Note: Tensioner springs included,£¨not pictured) is optional. For use with mounting rods prior to placing through mounting feet. Tensioner Springs not necessary for mounting fan(s)to radiator.
STEP 2
Position the Fan Assembly against the radiator or air conditioning condenser. Take the four Mounting Rods and carefully install them through the Mounting Feet and then though EITHER the radiator or air conditioning condenser.
Take the four 1 x1 Foam Pads and remove the paper backing.Now installation them(sticky side toward the core) onto the Mounting Rods now protruding through the radiator or air conditioning condenser.
Take the four Mounting Clips supplied and install them onto the Mounting Rods.The mounting Clips can only be used one time,so make sure the Fan Assembly is in the correct location.
Secure Mounting Clips until 1x1 Foam Pads are slightly compressed.Cut off any excess Mounting Rod.
STEP 3
The Electric Fan Assembly can be activated using a Manual Switch or Relay Wiring Kit,For Relay Wiring Kit, Reference the product label on the Electric Fan to determine the Positive(+) and Negative(-) wire colors.
Important:For Puller applications use the referenced wire colors stated.
For Pusher applications the two wires MUST be reversed to change airflow direction.
Description:
100% Brand new radiator cooling fan blade for Universal use
12V, 120W
¡Â11 AMP DRAW
10 Blades
Color: Black
Fan Diameter: 16.82"
Fan Thickness: 3.27"
Maximum Fan CFM: 1000 CFM
Maximum Fan RPM: 2000¡¾10% RPM
Easy direct installation, require NO modification
OE Fitment or Replacement, Push or Pull Type
Package Includes:
Fitment:
About this item:
?¡¼Radiator Cooling Fan¡½ 12V 120W 16 Inch radiator cooling fan with mount brackets and tie straps kit. Auxiliary equipment for cooling the entire engine compartment, including radiator, A/C system, intercooler, oil system, and transmission
?¡¼Slim & Push/Pull Design¡½Slim design provides excellent engine bay clearance for engine modification. Direct bolt-on installation and also reversible. It can be used as a puller.
?¡¼High-performing Specification¡½ Maximum Fan CFM: 1000 CFM; Maximum Fan RPM: 2000¡¾10% rpm; Blade Length:16 Inch; Number of Blades: 10 Blades; Blade Type: S-Curved. Overall Diameter: 16.82" inch, Overall Thickness:2.36 inch ;Amp Draw: ¡Â11 amp ;Watts:120W.
?¡¼High Quality¡½Lightweight Plastic Durable Material. Provides optimal flow, reduce pump noise. Good heat resistance and corrosion resistance ensure a long service life for the electronic radiator.
?¡¼Universal USE¡½Radiator cooling fan fit various vehicles and engines. Check the size of your radiator. If you have any questions while using it, please feel free to contact us. We will provide you with satisfactory service.
Puller Fans & Pusher Fans:
£¨This fan assembly is designed for both PUSHER and PULLER applications.To change airflow direction from the factory setting,you MUST follow the directions below or performance will be compromised!
HOW TO CHOOSE A ELECTRIC RADIATOR COOLING FAN?
Measure the area with an existing fan, radiator, and shroud removed to find out how much room you have to work with.
About diameter, you should get one/two fan that covers as much of the radiator as possible.
Always keep some clearance between the fan motor and the engine.
Straight blades move more air but make more noise. On the other hand, curved blades are quieter, but not more as much air. Choose according to your needs.
Puller fans provide more cooling capacity than pusher fans.
Always choose puller fans If space is an issue then use a pusher fan.
Warning: Installation of accessories should only be undertaken by those with mechanical knowledge and are familiar with working on vehicles,Always use eye protection (goggles,safety glasses or shield). Park the vehicle in a well lit area,on level ground and apply the parking brake.Only work on a cold vehicle that has bean sitting overnight, failure to do so will result in severe burns and injury.Before starting the vehicle,make sure no tools or any other items are left under hood that could interfere with or be drawn into moving parts of the engine.
Product Show:
STEP 1
Take the four mounting feet provided and attach them to the slots on the outside of the fan housing at the desired locations around the perimeter.
Please Note: Tensioner springs included,£¨not pictured) is optional. For use with mounting rods prior to placing through mounting feet. Tensioner Springs not necessary for mounting fan(s)to radiator.
STEP 2
Position the Fan Assembly against the radiator or air conditioning condenser. Take the four Mounting Rods and carefully install them through the Mounting Feet and then though EITHER the radiator or air conditioning condenser.
Take the four 1 x1 Foam Pads and remove the paper backing.Now installation them(sticky side toward the core) onto the Mounting Rods now protruding through the radiator or air conditioning condenser.
Take the four Mounting Clips supplied and install them onto the Mounting Rods.The mounting Clips can only be used one time,so make sure the Fan Assembly is in the correct location.
Secure Mounting Clips until 1x1 Foam Pads are slightly compressed.Cut off any excess Mounting Rod.
STEP 3
The Electric Fan Assembly can be activated using a Manual Switch or Relay Wiring Kit,For Relay Wiring Kit, Reference the product label on the Electric Fan to determine the Positive(+) and Negative(-) wire colors.
Important:For Puller applications use the referenced wire colors stated.
For Pusher applications the two wires MUST be reversed to change airflow direction.
|
|
|
|
|