¼³¸í
1. Type of programming: Programming with the receiver.
2. Channels: 2/4 Buttons
3. Code: Rolling Code.
4. Frequency: 433.92 MHz
5. Battery: 12V 23A £¨Include Battery£©
6. The gross weight of remote control: 35g
Compatible Models£º
BENINCA TO GO 2VA
BENINCA TO GO 4VA
BENINCA TO GO 2WV
BENINCA TO GO 4WV
Include£º
Remote Control
English Manual
Include Battery
Keychain
Disclaimer:
Your remote control must be the same as the picture and your model must be in the list, we will not be responsible for wrong purchase
NOTE:
This remote control supports BENINCA TO GO VA and BENINCA TO GO WV together, it can be switched each other as below:
A. If you buy BENINCA TO.GO 2VA 4VA, the initial state of the remote control is BENINCA TO.GO 2VA 4VA mode. If your original remote control is BENINCA TO.GO 2WV 4WV, you can switch the VA to WV mode.
1) Press the button 1 and button 2 at the same time about 7 seconds until the LED light goes off.
2) Keep holding on the buttons until the LED light flashes 2 times and then goes off,release the buttons, code is changed to BENINCA TO GO WV.
B. If you buy BENINCA TO.GO 2WV 4WV, the initial state of the remote control is BENINCA TO.GO 2WV 4WV mode. If your original remote control is BENINCA TO.GO 2VA 4VA, you can switch WV to VA mode.
1) Press the button 1 and button 2 at the same time about 7 seconds until the LED light goes off.
2) Keep holding on the buttons until the LED light flashes 1 times and then goes off,release the buttons, code is changed to BENINCA TO GO VA