3211148 3211142 3211149 3211180 3211196 Drive Belt for ATVv Polariss RZRr XP 1000/RZ R S Genera l 999cc 2015-2021
Item specifics
Condition: 100% Brand New
Product Type: Belts
Item Type: powersports-belt-drives
Material: Chloroprene rubber + Aramid String Cord
OEM Part Number: 3211148 3211142 3211149 3211180 3211196
Fits: ATV
Compatible Make: Polarii s
Compatible Model: RZR 1000
Suitable models
2015-2021 for Polarii s RZ R XP 1000
2015-2021 for RZ R XP 4 1000
2016-2020 for RZ R S 1000
2020-2021 for Genera l XP 1000
Product features
1. Made of high-quality neoprene rubber and advanced aramid thread, it has high-temperature resistance, fire resistance, light weight, high strength, dimensional stability, puncture resistance, abrasion resistance, chemical corrosion resistance, and good mechanical properties And other advantages, durable
2. It wears evenly, reduces belt failures, and can provide you with the required performance and durability even under the most demanding conditions
3. The belt has minimal stretch under load, which can provide stable variable speed RPM
HOW TO EXTEND BELT LIFE?
Break-in right and calm down correctly.
Increase the speed limit washer to prevent the main clutch from closing too far at high speed, thereby preventing the secondary clutch from opening too far and the belt from falling onto the clutch shaft.
Check whether the two clutches are aligned, if not, use a clutch alignment tool to help straighten the clutch.
Keeping the clutch clean will help improve performance and avoid clutch and belt wear.
Adjust your driving style, and don¡¯t make violent accelerations on surfaces that are subject to a lot (such as sand and dirt).
Regularly check whether the vent of the CVT box is inserted.
HOW TO BREAK IN AND COOL DOWN CORRECTLY?
The most important, break in a new CVT belt will result in a cooler-running belt maximized life and performance.
Drive your UTV in two-wheel high for 20 minutes between 25-45 mph (40-72 km/h)in flat terrain, avoiding hard accelerations and hills.
Shift the belt through the normal operational range by varying your UTV speed and engine RPM. But do not exceed ¾ throttle during break-in. Avoid excessively fast instantaneous speed causing belt slippage.
In extremely cold weather, extend the break-in time by 5-10 minutes to make the belt warm up optimally.
After 20 minutes of driving, let the unit cool down for 30 minutes after turning off the engine.
Repeat the above thermal cycle steps, turn the unit OFF and allow the belt to cool down again for 30 minutes.