|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ºê·£µå À̸§: GFYSHIP
- ±Ù¿ø: CN (Á¤Ç°)
- Á¦Ç° Áß·®: 0.2kg
- Ư¡: Gear Digital Display
- Ç°¸ñ ³Êºñ: 0cm
- ¸ðµ¨¸í: For Kawasaki
- ¿ÜºÎ Å×½ºÆ® Áõ¸í¼: ISO9000
- Ç°¸ñ Á÷°æ: 0cm
- Ç°¸ñ ³ôÀÌ: 0cm
- Á¦Ç° ±æÀÌ: 0cm
- ¼ÒÀç À¯Çü: Advanced ABS
- Material Type: As the picture shown
- Item Type: Motorcycle LCD Electronics 6 Speed 1-6 Level Gear Indicator
- Display Range: 1-6 Gear Display
- Light Color: Red/Blue/Green
- Waterproof Level: IP68
- Connector Type: Need to connect two connectors and a wire
- Need to set: Yes
- Special Function A: No need to cut any wires and no need for soldering
- Special Function B: Touch Sensor
- Special Function C: Auto Brightness Control
- Special Function D: High Speed Warning
- Special Function E: Robust Design
- Application 01: For Kawasaki 1400GTR
- Year 01: 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020-2022
- Application 02: For Kawasaki Concours 14
- Year 02: 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020-2022
- Application 03: For Kawasaki ZG1400 Concours
- Year 03: 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020-2022
¿É¼ÇÁ¤º¸[(173)Red][(175)Blue][(193)Green][(366)Fixed Ring Red][(496)Fixed Ring Blue][(691)Fixed Ring Green]Welcome to my store!
f you like other shippingments ,please tell me.
We will give you the details of the Ishipping you need.
If it is convenient, please collect our shop, in order to better receive new product information and promotional information~~
Note:
Disclaimer: Do not attempt to install the product if you don`t have basic mechanical skills!!!
The product has a version with a mounting bracket and a version without a mounting bracket. Please choose the product that suits you according to your actual situation. Please note that for product beauty, products with mounting brackets do not have the word `Gear` on the top of the surface.
Special Function:
Touch Sensor
Robust Design
High Speed Warning
Auto Brightness Control
Flipping the display upside down
No need to cut any wires and no need for soldering
Even if you do not run the motorcycle, you can complete the product settings. The setting can be completed when the motorcycle is completely stopped.
Sign Description:
C: Code Reading the firmware version
L: Learning Learning the gear positions
F: Filtering Adjusting the filtering (sampling period)
b: Brightness Adjusting the sensitivity of the light sensor
H: HSW High Speed Warning function
E: ESW Engine Speed Warning function
Upside down Flipping the display upside down
Defaults Resetting all values to factory defaults
Features:
Condition:100% Brand New
Light Color: Red/Blue/Green
1-6 Level IP68 Waterproof Gear display
FAST AND ACCURATE
Instant and accurate indication of the selected gear (right after the clutch is released) for added control and safety. The sampling period can be adjusted to make the response quicker or slower, depending on shift speed and signal conditions.
TOUCH SENSOR
All settings can be done via the touch sensor so there`s no opening on the housing, it is completely sealed and encapsulated in epoxy. The touch
sensitive area is on the TOP of the unit. However, after programming, the unit can be mounted even with the top side stuck to the dashboard (via the sticky pads supplied) and will function properly. It can also be used with the optional GFYSHIP Mount.
AUTO BRIGHTNESS CONTROL
The brightness of the display is adjusted automatically according to the ambient light intensity. The sensitivity of the sensor can be fine-tuned in the menu.
HIGH SPEED WARNING FUNCTION
If you wish, you may set the unit to warn you when the set road speed and/or the set engine speed is exceeded.
ROBUST DESIGN
- Full SMT-design, encapsulated in epoxy
- Flash memory to store user settings even with the battery disconnected
- Only inspected, high quality components are built in
- Each unit is extensively tested prior to shipping
Fitment:
For Kawasaki 1400GTR 2008-2022
For Kawasaki Concours 14 2008-2022
For Kawasaki ZG1400 Concours 2008-2022
Installation:
1. Gain access to the Gear Position Switch (GPS) connector.
2. Disconnect the GPS coupler. Make sure the gearbox is in Neutral and turn the ignition switch ON. Wait a few seconds. The Neutral indicator should NOT be lit with disconnected GPS coupler. After confirming this, turn the ignition OFF and proceed to the next step.
3. Connect the GFYSHIP plugs to the 3-pole plug adapters.
4. Neatly route the GFYSHIP cable from the plugs to the mounting location, preferably along the frame. Do not route the harness very close to the exhaust pipe or cylinder head.
5. Connect the GFYSHIP Red wire to an ignition switched +12V power lead by using the Red wire tap connector supplied.
Set Up:
Note: If the unit does not indicate the gears correctly with the pre-set gear position values, you`ll need to start the Learning procedure.The TOP side of the housing is the touch sensitive area so it must be kept free, away from all objects. If the unit is in a mount, remove it first.
- Have the gearbox in Neutral.
- Have the ignition OFF (the display must be blank).
- Turn the ignition ON and the engine stop switch to RUN position (the display should count up and then show "0"). Wait at least 2 seconds.
- With your index finger (without gloves) tap the top side of the unit and hold your finger until the first menu sign shows up. Remove your finger now.
Note: If the gearbox is switched to a gear then accessing the menu will be disabled even if you shift back to neutral. Cycle the ignition key to start
overIf the unit does not indicate the gears correctly, start the Auto-Learning procedure.
Perform the steps either in the garage with the engine running (put the bike on a rear stand) or while riding normally.
In the menu, select the "L" sign and do a long tap.
5. When you see the "1" sign flashing, select 1st gear.
The "1" sign starts flashing faster, indicating that the learning is in progress.
6. When you see the "n" (next) sign, select the next gear. The gear number starts flashing faster when the unit is learning the new gear position.
Repeat this step until all gears have been taught.
Note: If you`d like to cancel or start over the process, turn the ignition key off.
Keep riding in top gear until the "U" (update) sign starts flashing (if your bike has 5 gears only, it takes longer, about 15s). The unit is now
programmed and should indicate all gears correctly.
|
|
|
|
|